Seaskin Short Neck HoodRef: SSHDSN001 Price: £25.00 (Including VAT at 17.5%)
A fully featured, semi-dry hood suitable for all dive suits and neck seal systems. The face seal is cut to minamise exposed skin on the face, it is designed to go over the sealing skirt of your mask. * 5mm super stretchy dive grade neoprene. * Seven panel design for a superb fit. * Single lined 5mm face seal for comfort and performance. * Twin layer venting system in top panel. * 5mm Glideskin neck seal. * All seams glued and blind-stitched inside and out. Head measurement in cm
|
Vent System
|
 |
Seaskin Warm Neck HoodRef: SSHDWN001 Price: £25.00 (Including VAT at 17.5%)
A fully featured hood suitable for all dive suits fitted with warm neck systems. The face seal is cut to minamise exposed skin on the face, it is designed to go over the sealing skirt of your mask. * 5mm super stretchy dive grade neoprene. * Six panel design for a superb fit. * Single lined 5mm face seal for comfort and performance. * Twin layer venting system in top panel. * All seams glued and blind stitched inside and out. Head measurement in cm
|
Vent System
|
 |
Seaskin Short Neck Hood High VizRef: SSHDSNHV001 Price: £23.99 (Including VAT at 17.5%)
We kept getting requests for highly visible hoods, so here it is. * 5mm super stretchy dive grade neoprene in Flo lime green. * Seven panel design for a superb fit. * Single lined 5mm face seal for comfort and performance. * 5mm Glideskin neck seal. * All seams glued and blind-stitched inside and out. Head measurement in cm
|
|
 |
|
 |
|
 |
|
 |
Hood Attatched VestRef: SSHDVEST001 Price: £49.00 (Including VAT at 17.5%)
This hood attached vest boosts the performance of any wet suit by increasing insulation around the body core and greatly reducing flushing through the suit's zip and down the neck. The hood is built to the specifications of the warm neck hood above. The vest section is 3mm neoprene with a side zip for easy dressing and comfort. Sex
| Head measurement in cm
| Chest size in cm
| Waist size in cm
|
|
 |
Seaskin Suit Driers (pair)Ref: SSDRIERS Price: £19.95 (Including VAT at 17.5%)
Getting the dampness out of the inside of a drysuit can be a real problem. Hanging a pair of these silica gel driers inside a suit will draw out any residual moisture. They will last for years, easily regenerated to full drying capacity by simply leaving on a radiator. The webbing and clip arrangement will directly fit into a Seaskin drysuits with braces or simply down the legs if joined. They have dozens of other uses drying allsorts of kit efficiently.
|
 |
Lined Dry Gloves with Wrist SealRef: SSDGLINCONE Price: £30.00 (Including VAT at 17.5%)
Seaskin lined dry gloves are heavy duty PVC with an inner loop pile thermal fabric moulded in. The exterior of the dry glove is lightly textured for enhanced gripping. An excellent, very warm and durable glove system that has trimable latex cone wrist seals. Glove size
|
|
 |
Latex dryglove with seal (pair)Ref: SPE001-0018 Price: £11.71 (Including VAT at 17.5%)
Drygloves suitable for almost all watersports in colder temperatures whilst still giving a good degree of manual dexterity. The can be used with or without thermal liners. They seal on the wrist either directly onto the skin or over the wrist seal of drysuit or dry cags. A textured pattern on the palms and fingers give additional grip. If your suit has neoprene seals the seal should go under these and then the neoprene seal rolled back over. Glove size
|
|
 |
|
 |
|
 |
Uni-Tie reusable cable tie Black Pack of FiveRef: UNI004-UNITIEBLX5 Price: £3.50 (Including VAT at 17.5%)
As above but in techy black.
|
 |
LP hose release flanges (Hose hat), per pairRef: SIL001-60003 Price: £6.19 (Including VAT at 17.5%)
Pushed on to the end of low pressure hoses to aid their realse/fitting when wearing gloves. May need to warmed up in some very hot water to allow them to be pushed on. Sold in pairs.
|
 |