Price:£0.96 (Including VAT at 20%)
These are the brushes we use in production, they will survive being cleaned in solvent many times. Ideal for most repair jobs including seal changes.
Stormoprene 2-part Contact Adhesive 250ml
Price:£12.76 (Including VAT at 20%)
One of the best contact glues available. It can be used on almost all water sports fabrics from Hypalon (for repairing inflatable boats) to neoprene and trilaminate diving suits. The ideal glue for replacing seals and attaching braces or pockets to drysuits. This is a Toluene free product but can not be sold to persons under eighteen.
Mix the contents of the Part B bottle with the Part A thoroughly before applying the glue.This product due to its flammability is classed as "Dangerous goods" and a shipping charge of £9.60 will apply for orders within mainland UK. We cannot ship this item to outside mainland UK. Please do NOT order if outside mainland UK.
Data Sheet and instructions for use
Neoprene Queen 30g
Price:£5.02 (Including VAT at 20%)
One part neoprene adhesive in a tube. Good for small repairs in neoprene drysuits and wetsuits. The adhesive is black in colour.
Keep it in your kit bag on dive trips for running repairs.
Ideal for anything made from neoprene.This product due to its flammability is classed as "Dangerous goods" and a shipping charge of £9.60 will apply for orders within mainland UK. We cannot ship this item to outside mainland UK. Please do NOT order if outside mainland UK.
Price:£5.75 (Including VAT at 20%)
The only glue you need to fix a rip leak or tear on any flexible material or fabric.
Very strong, but remains flexible when cured. Very resistant to abrasion.
Essential in a repair kit for overnight repairs. Handy small tube size, very similar when cured to Aquasure.This product due to its flammability is classed as "Dangerous goods" and a shipping charge of £9.60 will apply for orders within mainland UK. We cannot ship this item to outside mainland UK. Please do NOT order if outside mainland UK.
Price:£5.41 (Including VAT at 20%)
Normal cure time for Stormcure (see above) is about 4 hours touch dry and 12 hours for full cure.
With StormCure Accelerator this reduces to 30 minutes touch dry and 2 hours full cure.
StormCure can also be used as a very good cleaner and primer for surfaces which will be glued. Comes in a 20ml dripper bottle to easily add the product a small amount at a time. This product due to its flammability is classed as "Dangerous goods" and a shipping charge of £9.60 will apply for orders within mainland UK. We cannot ship this item to outside mainland UK. Please do NOT order if outside mainland UK.
PVC Repair Adhesive 90g
Price:£10.98 (Including VAT at 20%)
PVC Glue comes in a 90 gram tube. I know it says PVC on the tube but this works really well on the PU SiTech cuff rings, NeckTite rings and valve patches. This is because it is a combination glue made from with solvents which will help weld PVC together AND it also contains a very strong and flexible polyurethane adhesive.
After buffing (roughening with sandpaper) the valve patch/PU cuff rings coat the plastic and suit with glue and press together when still wet. Keep clamped together for 24 hours for maximum bond strength.
When using as a PVC adhesive Make sure any patch you use externally, has rounded corners, or the corners may peel upwards as the glue dries.
Also great for trailer curtains, inflatable boats, footwear like trainers, waders, boots etc. and many other items made from PVC or many other waterproof and airtight materials too.This product due to its flammability is classed as "Dangerous goods" and a shipping charge of £9.60 will apply for orders within mainland UK. We cannot ship this item to outside mainland UK. Please do NOT order if outside mainland UK.
|Aquaseal 8oz Tube (Spare Part) Ref: AQUASURE|
Aquaseal® Urethane Repair Adhesive & Sealant
The industry standard for maximum strength repairs to wet suits, dry suits and all watersports products. The flexible urethane formula waterproofs, seals and protects against abrasion. An adhesive with hundreds of watersports and household uses. For a fast cure, use Aquaseal with Cotol-240 (unfortunately we can not ship Cotol due to its flamability). This is a mega 8oz tube. Please note that this is NOT a suiable adhesive for attaching latex seals to drysuits, for appropriate glues for this see the "Seaskin User Manual".
This product due to its flammability is classed as "Dangerous goods" and a shipping charge of £9.60 will apply for orders within mainland UK. We cannot ship this item to outside mainland UK. Please do NOT order if outside mainland UK.
Guide to using Aquaseal to repair a puncture
Safty Data Sheet for Aquasure
Price:£18.00 (Including VAT at 20%)
Stormslide Zip Oil
Price:£4.79 (Including VAT at 20%)
Waterproof drysuit zips need lubricating regualrly to keep them in good working order. We use on the inside of the teeth and wax on the outside.
Also good for zips on wetsuits, drysuit pockets, BC's, tents, bags and many other items.
Non Toxic and Odour Free.
Contains no silicones (important for dryzips).
Comes in a 30ml bottle with snap on dropper cap for easy use.
|Bees wax blocks (Spare Part) Ref: BEESWAXBLOCKS|
Bees wax block for keeping the dry zips running smoothly. Looking after your zip is essential for a keeping a suit dry and avoiding expensive repairs.
Price:£1.20 (Including VAT at 20%)
Price:£1.52 (Including VAT at 20%)
Cleans and disinfects your wetsuit or neoprene drysuit. Water often contains plankton, bacteria and viruses, which can cause illness and bad smells. "Neoprene clean" kills these mircro organisms, not to mention the stuff on the inside of the suit! leaving your suit clean and fresh.
Each sachet contains 20ml of concentrate. Mix in a large bucket or bath of water. Submerge your wetsuit or drysuit and leave for a few minutes. Then drip dry as normal.Give your suit an annual treat.
|Talc Bottles (Spare Part) Ref: EXP001-100GMSBLK|
Shaker bottle of French chalk (pure talc) for dusting seals making them easier to get on and off. This product does not contain any of the starches put into some bathroom talcum powders as drying agents as this can turn into a gue when used in a drysuit.
Dust neoprene and latex seals fitted to Drysuits for easier dressing and extend seal life.
- Creates a smooth, friction free layer to help reduce the effect of chaffing
- 100% perfume and colour free
- Dermatologically approved
Price:£2.74 (Including VAT at 20%)
Price:£5.96 (Including VAT at 20%)
Aids the of slipping your hands, feet and head through tight latex seals.Of course the seals need to fit snugly in order to keep out the water on dry or semi dry suits, yet this simple process can cause gradual wear and tear on the seals. The same too applies to wetsuits, getting them on is not easy, and all that tugging and pulling can tear fabric seams.Can be used to lubricate nylon zips that are becomming hard to close,
Ease the whole process with Salclear Scubalube with this purpose designed seal and zipper lubricant for divesuits
|McNett - Seal Saver Ref: BEA001-MNSAV|
Protects and conditions dry suit seals, gaskets, O-rings and rubber products. Regular application of Seal Saver preserves and maintains latex and neoprene seals while inhibiting oxidation and deterioration. Seal Saver provides a protective, high gloss finish. 37ml easy use dispensing bottle.
Seal Saver protects and conditions dry suit seals, gaskets, O-rings and rubber products.
Regular application of Seal Saver preserves and maintains latex and neoprene seals while inhibiting oxidation and deterioration. Seal Saver provides a protective, high gloss finish.
100% silicone formula
High gloss finish
Preserves latex and neoprene seals
Extends the life of gaskets and rubber products
Price:£6.37 (Including VAT at 20%)
Seaskin Suit Driers (pair)
Getting the dampness out of the inside of a drysuit can be a real problem. Hanging a pair of these silica gel driers inside a suit will draw out any residual moisture. They will last for years, easily regenerated to full drying capacity by simply leaving on a radiator. The webbing and clip arrangement will directly fit into a Seaskin drysuits with braces or simply down the legs if joined.
They have dozens of other uses drying allsorts of kit efficiently.
Price:£3.48 (Including VAT at 20%)
These are Brilliant! Can be threaded through most zips used on diving kit. Makes opening pockets possible by feel alone even with thick gloves, but the white colour and orange cord make them highly visible too. Comes as a pack of four pulls.
Price:£3.58 (Including VAT at 20%)
These are a great product for dozens of uses in tidying up any diving rig in fact are ideal ties for any water sport activity. Can be fitted and released even when wearing dive gloves. UV, weather and salt water resistant, strong yet elastic which makes it able to grip the item being tied and does not crush. They are Capable of stretching to twice its own length. Uni-tie is re-useable time after time making it a very environmentally friendly product. You are buying five uni-ties, each uni-tie is 240mm length x 15mm wide and has a breaking strain on a pull test of 9kg or 21 lbs. Keep them "tied" to your dive bag and you will find that you start using them for allsorts things!
Some more uses.
Uni-Tie reusable cable tie Black Pack of Five
Price:£3.58 (Including VAT at 20%)
As above but in techy black.
Glue on Dee Rings 25mm (pair)
Price:£3.65 (Including VAT at 20%)
A pair of 25mm Dee rings sewn onto 9cmx9xm fabric patches (drysuit material). These can be glued to the inside of pockets , suits or other equipment for additional attachment points. The patches can be cut down to fit tight spots as the fabric will not fray.
Glue on Computer Strap Patches (pair)
Price:£5.70 (Including VAT at 20%)
With this pair of straps glued on the arms of your drysuit your computer or other devices will not slip down your arm making them hard to read or even being lost. Their size (width 50mm) allows almost all straps to be threaded through them. These are for DIY fitting, use an adhesive such as Stomoprene 2 part.
|25mm Neoprene Tape per Meter (Spare Part) Ref: AOF10125MM|
Basically thin rubber tape that can be glued on to finish off seal replacements or punctures in membrane type suits.
Price:£1.32 (Including VAT at 20%)
|38mm Neoprene Tape per Meter (Spare Part) Ref: AOF10138MM|
As above but 38mm wide.
Price:£1.80 (Including VAT at 20%)
Heat tape T2000X 22mm White per metre
Price:£1.45 (Including VAT at 20%)
Heat tape for the sealing of seams in three layer breathable drysuit and waterproofs. Should be applided with a specialist machine, although can done using an iron. For this reason we recomend this for professional repairers only. 20mm wide White.
Heat tape Melco T5000 black per Metre
Price:£1.62 (Including VAT at 20%)
Provides an attractive and long lasting finish to sewn or welded seams of neoprene, lycra and a wide variety of similar materials. Melco Tape provides additional strength to the seam and stretches in every direction to provide a longer lasting bond. Should be applided with a specialist machine, although can done using an iron. For this reason we recomend this for professional repairers only. 20mm wide black.
Melco T5500 Tape black Reinforcement 22mm
Price:£1.92 (Including VAT at 20%)
Heat tape with a PU dot reinforcement. Can be applied to the outside of dry and wetsuits suits to finish the edges of glued on components such as SiTech cuff ring systems and to protect and strengthen seams.
Only sold as pre-cut 1 metre lengths.
Price:£15.17 (Including VAT at 20%)
This is usually applied to dry suits and wetsuits during their manufacture when the panel can be laid flat. It can be cut in to any shape and then applied using heat and pressure. This can be very tricky to do to suits already made up without damaging it so we think is for professional repairs only. Sold as a 50cm x 30cm sheet.
Braces Set for DIY Fitting to Membrane Drysuits
Price:£7.66 (Including VAT at 20%)
As above but for membrane drysuits.
Price:£12.12 (Including VAT at 20%)
The ideal hanging solution for your drysuits with no danger of damaging latex neck seals or distorting neoprene ones.
The upside down position allows the suit to dry quickly, and lets it ventilate properly during storage.
Swivelling hook allows the suit to turn freely.
A really great addition are the built-in dummy cylinder valve for easy regulator attachment (DIN/Yoke) and hooks for hoses
Perfect for all kind of Dry Suits with attached boots
Holds your suit upside down for better ventilation
Sturdy and simple to use
High neck to support natural shape of seal
NOTE: Only works with suits fitted with boots NOT compressed neoprene or latex socks.