Apeks Drysuit Valve System

Apeks Drysuit Valve System

Apeks Low Profile Auto Dump AP0704

  • Ref: APE001-AP0704

Share this:


One of most technically advanced and reliable automatic dump valve available. Correctly adjusted, the valve gives effortless yet controlled hands free ascent as expanding air automatically vents from the suit. Equipped with a manual over-ride system allowing you to vent the suit completely without disturbing your personal buoyancy setting.
This valve has the lowest profile with optimum dump rate. It has an improved ratchet feel and is ergonomically designed for ease of use. Mounting patches have been designed for use with this valve and are available see below APO166 .
Low Profile Auto Dump Valve Operation

The Auto-dump valve is designed to control the volume of air in the diver's dry-suit and can be adjusted by the diver to attain the correct buoyancy and allow a safe ascent.

The volume of air in the dry suit is controlled by means of a rotating cap. Turning the cap clockwise increases the spring load acting on the valve seat and allows a larger volume of air to be maintained in the dry suit. Anti-clockwise rotation of the cap reduces the spring load, allowing air to escape and so hold a smaller volume of air. The rotating cap also features a ratchet mechanism, to prevent accidental adjustment of the dump valve.
As the diver ascends, the air in the dry-suit expands, increasing the diver's buoyancy. The auto-dump valve senses the increased pressure in the dry-suit, which lifts the valve seat against the spring, allowing air to vent. This venting action maintains the volume of air in the dry-suit and allows a controlled ascent by the diver. If, at any time during the dive, it is felt that there is too much air in the dry-suit, the cap can be pressed manually to over-ride the valves settings and vent excess air.
If the cap is pressed with insufficient dry-suit pressure a secondary non return valve is fitted to prevent the ingress of water into the dry-suit.Selection of under clothing is important to allow escaping gas to vent through the valve, however the back nut is designed to prevent under clothing from blocking the escaping gas.
The valve can be assembled and removed from a dry-suit without the use of any tools, this is achieved by pressing the cap and turning simultaneously to lock while the back nut is removed or tightened.
48.60
all prices include VAT



Safe & Secure

For your peace of mind we accept payments via Secure Trading secure gateways.

Click Here to Read More

Free UK Delivery

On most orders within mainland UK. Excludes ROI and Channel Islands.

Click Here to Read More

We Deliver Worldwide!

Outside of the UK? Not a problem. We deliver to most countries worldwide.

Click Here to Read More