Ultra Option-Convenience Zip (medium weight)

Ref: SSUOPTPZIPM

Price: £59.23 (Including VAT at 20%)

A medium weight 28cm horizontal convenience dry zip with an internal neoprene flap can be fitted. For men, this saves half undressing when 'nature calls'.

This is an option for an Ultra drysuit. Should only be ordered if a Ultra (compressed neoprene) type drysuit is also ordered

Ultra Option-HD Convenience Zip

Ref: SSUOPTPZIPHD

Price: £69.44 (Including VAT at 20%)

Fitting a heavy duty 28cm horizontal convenience dry zip with an internal neoprene flap.

This is an option for an Ultra drysuit. Should only be ordered if a Ultra (compressed neoprene) type drysuit is also ordered

Dry Suit Option - Fitted SiTech Pee Valve

Ref: SS-OPTSITECHPVAL

Price: £46.03 (Including VAT at 20%)

Keeping Hydrated and then doing Long dives/deco times is no longer a problem. Relieve yourself in a donned drysuit!

Features:
Pressure Compensated
Twin Check valves for safe evacuation and no outer leakage
ON/OFF valve for easy use
Easy to clean, disassembly tool included

This option is only for the fitting of the valve to a new seaskin drysuit
Catheters not included (sold seperately) For Catherters see our "Pee Valve Catheters" section.

This is an option for a Seaskin drysuit. Should only be ordered if a Seaskin drysuit is also ordered.

Ultra Option-Latex Neck Seal

Ref: SSUOPTNKLA

Price: £19.40 (Including VAT at 20%)

Many people prefer a latex neck seal to a neoprene one because it provides better protection against water ingress and is easier to put on. Latex seals need more care than neoprene and are often more prone to damage, but they are easier to replace.The seals are trimable to an exact fit.

This is an option for an Ultra drysuit. Should only be ordered if a Ultra (compressed neoprene) type drysuit is also ordered

Ultra Option-HD Latex Neck Seal

Ref: SSUOPTNKLAH

Price: £23.48 (Including VAT at 20%)

A heavy duty neck seal that is more durable than the standard latex, but harder to get on and off.

This is an option for an Ultra drysuit. Should only be ordered if a Ultra (compressed neoprene) type drysuit is also ordered

Ultra Option-NeckTite System fitted

Ref: SSUOPTNKTITE

Price: £55.58 (Including VAT at 20%)

With this system fitted to a Ultra drysuit you can change the neck seal on a drysuit in a matter of minutes without the use of adhesives. This comes with the Siflex (silicon) neck seal which has much more resistance to the degrading effects of UV and ozone. Because of the greater stretchiness of silicon over latex, one size (when trimmed) fits all. The silicon Silflex seal is also good for people that have an allergy to latex.

To take full advantage of this system do not forget to order a spare neck seal to keep in your kit bag for quick at dive site neck seal changes!

This is an option for an Ultra drysuit. Should only be ordered if a Ultra (compressed neoprene) type drysuit is also ordered

Dry Suit Option - Cuff Dump instead of Auto Adjustable

Ref: SSOPTCUFFDU

Some people still prefer the simplicity of a cuff dump, which is positioned on the left arm. There is no extra cost to make this change.

This is an option for a Seaskin drysuit. Should only be ordered if a Seaskin drysuit is also ordered.

Dry Suit Option - Old-style High Profile Apeks Dump Valve

Ref: SSOPTOLDDUMP

Some people still prefer the old-style Apeks Auto Dump APO158, finding it easier to use. However please note that the quoted flow rates are a third of the new design low profile units. There is no extra cost to make this change.

This is an option for a Seaskin drysuit. Should only be ordered if a Seaskin drysuit is also ordered.

Dry Suit Option - Cuff dump in Addition to shoulder dump

Ref: SSOPTCUFFANDADJ

Price: £13.27 (Including VAT at 20%)

This option adds an additional cuff dump fitted to the left wrist as well as the standard adjustable shoulder dump. Some people prefer to run the two valves together and if you are used to this method or not 100% about adjustable valves it can be very successful.

This is an option for a Seaskin drysuit. Should only be ordered if a Seaskin drysuit is also ordered.

Dry Suit Option - Move Adjustable Dump to wrist (Rebreather)

Ref: SSVOPTRBDUMP

When using rebreathers with front mounted counter lungs some people find that adjustment of "shoulder mounted" dump valves is restricted. This option repositions the dump valve to the left wrist position. This option is for experienced closed circuit divers who understand the correct use of the exhaust valve when it is in the cuff position. We recommend that you also select "Dry Suit Option - SiTech Valve System (inc hose)" due to the smaller diameter of the SiTech dump valve fitting better into the cuff position.
There is no cost to change simply use the "add to cart" button if you wish this option for your dry suit.

This is an option for a Seaskin drysuit. Should only be ordered if a Seaskin drysuit is also ordered.

Dry Suit Option - Inflation Valve Comfort Patch

Ref: SSOPTCOMPAT

Price: £5.10 (Including VAT at 20%)

A 7mm neoprene patch that is attatched behind the inflation valve by Velcro. This reduces any discomfort caused by the valve backing plate being pressed into your chest and also deflects cold air from being forced through your undersuit when the inflator is operated.

This is an option for a Seaskin drysuit. Should only be ordered if a Seaskin drysuit is also ordered.

Dry Suit Option - Swap Stardard Seatec Nipple for a CENJ

Ref: SSOPTINCENJ

Price: £4.60 (Including VAT at 20%)

This option swaps the Apeks swivel inflator with a Seatec nipple (fitted as stanadard) for one with a CENJ nipple. The Seatec or "International" fitting is the connector commonly used for BC and wing inflators. Whereas the Apecks coupling will push straight together the Seatec requires the collar on the hose to be pulled back while pushing it onto the valve. The hose supplied with your suit will be matched to the valve nipple type.

This is an option for a Seaskin drysuit. Should only be ordered if a Seaskin drysuit is also ordered.

Dry Suit Option - Increase the Length of the LP Hose

Ref: SSOPTLONGLP

Price: £2.28 (Including VAT at 20%)

In most cases the standard 74cm Low Pressure hose is the ideal length. If you have a chest measurement over 130cm, or with some twin sets, a longer 89cm hose makes connecting to the inflation valve easier.

This is an option for a Seaskin drysuit. Should only be ordered if a Seaskin drysuit is also ordered.

Dry Suit Option - SITech Valve System (including hose)

Ref: SSOPTSITECVSETPUSH

Price: £7.82 (Including VAT at 20%)

An alternative to a Apeks set up these are excellent dry suit valves from Sweden. This "push" inflator is operated in the normal way. The nipple type is "International". The 80cm inflator hose is a simple push fit. The unique internally fitted valve patch gives a neat external finish to the suit and allows us to mount it closer to suit seams.

This is an option for a Seaskin drysuit. Should only be ordered if a Seaskin drysuit is also ordered.

Ultra Option-Attached Hood

Ref: SSUOPTHOODA

Price: £24.50 (Including VAT at 20%)

This fully featured hood is bonded to the outside of the drysuit. This option is only suitable for suits which are also having a latex neck seal (or Siflex neck system) fitted.
* 5mm super stretchy dive grade neoprene.
* Six panel design for a superb fit.
* Single lined face seal for comfort and performance.
* Twin layer venting system in top panel.
* All seams glued and blind stitched inside and out.

This is an option for a Seaskin drysuit. Should only be ordered if a Seaskin drysuit is also ordered.

Head measurement in cm ??505152535455565758596061626364656667686970

Hood Colour BlackHiViz Yelllow

Ultra Option-Warm Neck standard

Ref: SSUOPTWNAT

Price: £9.19 (Including VAT at 20%)

A warm neck system allows for a correctly shaped hood to be secured at its bottom edge. This eliminates any cold spots in this area that may occur with a latex neck seal. Made from 3mm Armatex neoprene it is bonded onto the suit, and is adjusted by two Velcro sections.
Only available with the latex neck option (or Siflex neck system).


This is an option for an Ultra drysuit. Should only be ordered if a Ultra (compressed neoprene) type drysuit is also ordered

Dry Suit Option - Warm Neck Simple

Ref: SSNUOTWNATDIR

Price: £8.40 (Including VAT at 20%)

As above but without the Velcro adjustment. It is designed to sit flatter and not so far up the neck. Without the Velcro it is less easy to catch the yoke of the hood underneath, however once the hood is inserted it does make head/neck movement easier as it is less bulky.
Only available with the latex neck (or Siflex neck system) option.

This is an option for an Ultra drysuit. Should only be ordered if a Ultra (compressed neoprene) type drysuit is also ordered

Ultra Option-Latex Wrist Seals

Ref: SSUOPTWRLA

Price: £18.38 (Including VAT at 20%)

Many people prefer latex wrist seals to neoprene ones because they provide better protection against water ingress. They are easier to put on, but are not quite as warm. Latex seals need more care than neoprene ones and are often more prone to damage, but they are easier to replace.
If you would like this option but would prefer the seals to be cone shaped instead of bottle shaped, add this item to cart and then select "Dry Suit Option - Swap from Bottle to Cone Wrist seals"

This is an option for an Ultra drysuit. Should only be ordered if a Ultra (compressed neoprene) type drysuit is also ordered

Ultra Option-STD Latex Wrist Seals with Neo Covers

Ref: SSUOPTWRLACOV

Price: £24.50 (Including VAT at 20%)

Adding neoprene covers over standard latex wrist seals gives more protection from abrasion damage and UV degradation due to sun light.. When combined with a pair of neoprene gloves (which are worn under the cover) it much warmer around the wrist area. These can making the fitting of rings for dryglove systems difficult (they do work well with "normal" drygloves with their own seals)
If you would like this option but would prefer the seals to be cone shaped instead of bottle shaped, add this item to cart and then select "Dry Suit Option - Swap from Bottle to Cone Wrist seals"

This is an option for an Ultra drysuit. Should only be ordered if a Ultra (compressed neoprene) type drysuit is also ordered

Ultra Option-HD Latex Wrist

Ref: SSUOPTWRHDL

Price: £23.48 (Including VAT at 20%)

Heavy duty wrist seals that are more durable than the standard latex, but harder to get on and off.
If you would like this option but would prefer the seals to be cone shaped instead of bottle shaped, add this item to cart and then select "Dry Suit Option - Swap from Bottle to Cone Wrist seals"

This is an option for an Ultra drysuit. Should only be ordered if a Ultra (compressed neoprene) type drysuit is also ordered

Ultra Option-HD Latex Wrist Seals with Neo Covers

Ref: SSUOPTHDWRLACOV

Price: £29.62 (Including VAT at 20%)

Adding neoprene covers over Heavy Duty latex wrist seals gives more protection from abrasion damage and UV degradation due to sun light. When combined with a pair of neoprene gloves (which are worn under the cover) it much warmer around the wrist area. These can making the fitting of rings for dryglove systems difficult (they do work well with "normal" drygloves with their own seals)
If you would like this option but would prefer the seals to be cone shaped instead of bottle shaped, add this item to cart and then select "Dry Suit Option - Swap from Bottle to Cone Wrist seals"

This is an option for an Ultra drysuit. Should only be ordered if a Ultra (compressed neoprene) type drysuit is also ordered

Ultra Option-STD wrist seals with Velcro Adjust' Neo covers

Ref: SSUOPTSTDWRLACOVVEL

Price: £29.20 (Including VAT at 20%)

With the Velcro adjustment your gloves are easier to fit under the covers. The wrists can be tightened over the gloves.Adding neoprene covers over standard latex wrist seals gives more protection from abrasion damage and UV degradation due to sun light. Note, these can making the fitting of rings for dryglove systems difficult (they do work well with "normal" drygloves with their own seals)
If you would like this option but would prefer the seals to be cone shaped instead of bottle shaped, add this item to cart and then select "Dry Suit Option - Swap from Bottle to Cone Wrist seals"

This is an option for an Ultra drysuit. Should only be ordered if a Ultra (compressed neoprene) type drysuit is also ordered

Ultra Option-HD wrist seals with Velcro Adjust' Neo covers

Ref: SSUOPTHDWRLACOVVEL

Price: £33.94 (Including VAT at 20%)

As above but with heavy duty latex wrist seals
If you would like this option but would prefer the seals to be cone shaped instead of bottle shaped, add this item to cart and then select "Dry Suit Option - Swap from Bottle to Cone Wrist seals"

This is an option for an Ultra drysuit. Should only be ordered if a Ultra (compressed neoprene) type drysuit is also ordered

Dry Suit Option - Swap from Bottle to Cone Wrist seals

Ref: SSUOPTCONEWR

Select this option if you have previously selected a latex wrist option but you would like the seals to be cone shaped instead of bottle shaped.

Latex seals are available in two different shapes (as well as standard and heavy duty thickness).Bottle seals have a 40mm parallel section at the end which sit comfortably on the wrist. We have fitted bottle wrists as the nom for many years and when correctly sized to the wearer, they offer a good balance between comfort, wrist sealing and ease of dressing. There are some people who prefer the cone type as they feel that the tapered end "bites" more firmly into the skin of the wrist giving a better seal this high fitting up the wrist also can reduce any interference from under suit sleeve ends. The smaller sealing area of cone seals can avoid the channels caused by wrist tendons that can cause leaks with some divers. Cone wrist have ring trimming guides to further adjust the fit. The shoulder section of bottles seals makes the fitting of any dryglove ring system much easier. This swap applies to all the above latex wrist options.
If you are unsure which to go for the safe bet is go with the bottle type.
There is no cost to switch

This is an option for a Seaskin drysuit. Should only be ordered if a Seaskin drysuit is also ordered.

Ultra Option-Manchette Wrist seals

Ref: SSUOPTWRMANCH

Price: £25.28 (Including VAT at 20%)

Very old school! Based on the original drysuit seals These Manchette are still favored by some commercial divers. Things have moved on and we feel that for the vast majority of divers and that bottle or cone seals offer better results in terms of comfort. However we are not about to tell someone who has been diving for thirty years in the most difficult conditions that they are wrong.

This is an option for an Ultra drysuit. Should only be ordered if a Ultra (compressed neoprene) type drysuit is also ordered

Ultra Option-SiTech Docking System 60910 Fitted

Ref: SSSITEC60910ULT

Price: £35.78 (Including VAT at 20%)

This Quick Cuff ring system is glued to the drysuit. Latex or Siflex (see below to specify Siflex wrist seals) seals can be very easily changed at the dive site or boat without the use of any glues. Normal dive gloves can be worn, or the SiTech dry glove system can be docked into place.
To take full advantage of this system do not forget to order a spare pair of wrist seals to keep in your kit bag for quick on dive site cuff changes! Comes with bottle latex seals, if you require latex cone seals add to cart "Dry Suit Option - Swap from Bottle to Cone Wrist seals", if you require silicon seals, add to cart "supplement for Siflex seals".
See SiTech glove system page for compatable drygloves

Note: Neoprene over cuffs are not compatible with this system.


This is an option for an Ultra drysuit. Should only be ordered if a Ultra (compressed neoprene) type drysuit is also ordered

Supplement for Siflex seals with Sitech Docking system

Ref: SSOPTSILFLEXSUP

Price: £3.84 (Including VAT at 20%)

Add this option to your cart if you wish to upgrade the latex seals that come with the SiTech docking system 60910 to Siflex silicon seals.

Type of seal SILFLEX BottleSILFLEX Cone

Ultra Option-SiTech Oval Cuff Rings (Siflex seals)

Ref: SSSITEC60916ULTRA

Price: £43.90 (Including VAT at 20%)

The QCS Oval cuff ring system has an oval and narrow design and you will not be bothered by the rings during the dive or on land as some poeple find the round rings too bulky. They do feel much less cumbersome and even the biggest hands seem able to pass tghrough them. These at the moment do not have a dryglove system that fits on to them, although one is development and hopefully being lauched before Autum 2011we have no details of price at the moment
The QCS Oval enables quick exchange of wrist seals, which is perfect when the suit needs to have different sizes of seals or wish to run the lastest silicon seals. Also if you have ripped a seal when just ready to jump into the water this will help you. The exchange is made in a few minutes.
System comes with "one size fits all" Siflex bottle cuffs.

This is an option for an Ultra drysuit. Should only be ordered if a Ultra (compressed neoprene) type drysuit is also ordered


Note: Neoprene over cuffs are not compatible with this system.

Dry Suit Option - Compressed Neoprene Socks

Ref: SSUOPTCOMPSOX

As an alternative to having boots attached to the suit, 3mm compressed neoprene socks can be bonded on. When diving a conventional pair of wetsuit boots, or some form of "rock boots", are worn over the top. This system is warm and very much reduces the air that can become trapped around the feet. Care should be taken not to walk distances in these as there is a risk of puncture.
The have the additional advantage of enabling the suit to be completely turned inside out for easy drying and servicing.
There is no additional charge to swap to these socks.

Please select this option if you have a foot size of 37 and below, or 51 and above, as drysuit boots are not availble in these sizes but we can make compressed socks to fit.

This is an option for an Ultra drysuit. Should only be ordered if a Ultra (compressed neoprene) type drysuit is also ordered

Ultra Option-Heavy Duty Latex Boots

Ref: SSUOPTLABTSHD

Price: £14.29 (Including VAT at 20%)

Heavy duty latex boots offer even greater durability than standard latex. The addition of a heel makes them ideal for walking in, making them first choice for Police and rescue divers. They still require additional socks to compensate for the reduced insulation (see Thinsulate sox).

This is an option for an Ultra drysuit. Should only be ordered if a Ultra (compressed neoprene) type drysuit is also ordered

Ultra Option-Standard Latex Boots

Ref: SSUOPTLABTSSTD

Price: £11.88 (Including VAT at 20%)

These boots are an excellent choice for expedition divers trying to keep the weight of their gear to a minimum. Flexible and light they do require more thermal insulation to be worn on the feet than the normal neoprene boots.

This is an option for an Ultra drysuit. Should only be ordered if a Ultra (compressed neoprene) type drysuit is also ordered

Ultra Option-Braces Set

Ref: SSUOPTBRACE

Price: £12.77 (Including VAT at 20%)

With a custom fit Ultra drysuit, braces are not needed to improve the fit. Braces are useful, however, for pre- and post-dive times when the suit can be worn with the top half down around the waist.

This is an option for an Ultra drysuit. Should only be ordered if a Ultra (compressed neoprene) type drysuit is also ordered

Dry Suit Option - Reflective Tape Kit

Ref: SSUOPTRETRO

Price: £14.29 (Including VAT at 20%)

Four reflective patches are bonded onto the suit at the ankles and forearms. This improves the visibility of the suit both in and out of the water. This retro tape conforms to SOLAS requirements.

This is an option for an Ultra drysuit. Should only be ordered if a Ultra (compressed neoprene) type drysuit is also ordered

Ultra Option-PU Shoulder Pads

Ref: SSUOPTRNSH

Price: £7.15 (Including VAT at 20%)

Polyurethane patches can be bonded onto the suit to protect against the wear caused by harness straps. With the outer fabric used on the Ultra drysuit we feel that these patches are not necessary except when the suit is used in the most arduous conditions, especially since they reduce stretch in the shoulder area which is critical for comfort and mobility.

This is an option for an Ultra drysuit. Should only be ordered if a Ultra (compressed neoprene) type drysuit is also ordered

Ultra Option-PU Crutch Reinforcement

Ref: SSUOPTRNCRU

Price: £5.40 (Including VAT at 20%)

Polyurethane patches can be bonded onto the crutch panel of the suit to protect against wear from harness crutch straps. Note this does reduce the stretch of the neoprene in this area of high flex.

This is an option for an Ultra drysuit. Should only be ordered if a Ultra (compressed neoprene) type drysuit is also ordered

Ultra Option-PU Bum Pads

Ref: SSUOPTRNBUM

Price: £8.68 (Including VAT at 20%)

Polyurethane patches are bonded onto the suit to protect against wear in the seat area. As with the optional shoulder pads, we feel that these are unnecessary except when the suit is used in the most arduous conditions. They reduce the stretch in this area making the suit less flexible.

This is an option for an Ultra drysuit. Should only be ordered if a Ultra (compressed neoprene) type drysuit is also ordered

Dry Suit Option - PU Elbow Pads

Ref: SSUOPTRNE

Price: £7.15 (Including VAT at 20%)

Polyurethane patches are bonded onto the suit to protect against wear on the elbows. As with the shoulder and bum pads, we feel that these are not necessary except when the suit is used in the most arduous conditions, since they reduce the stretch when flexing the arms.

This is an option for an Ultra drysuit. Should only be ordered if a Ultra (compressed neoprene) type drysuit is also ordered

Dry Suit Option - Name Badge Ultra

Ref: SSNOPTNAMEULTRA

Price: £6.12 (Including VAT at 20%)

Having your name on your suit makes it easier to recognise when it's hanging up and makes you more easily identified when you're wearing it. Great for instructors, expedition divers and a good way to remind new buddies and skippers who you are! When ordering, state if you want a national flag included.
When you click on the "Add to Cart" button you will be asked to the enter what you want embroidered onto the badge (check your spelling and not too rude please) and what National flag, if any.

This is an option for a Seaskin drysuit. Should only be ordered if a Seaskin drysuit is also ordered.

Dry Suit Option - Change Mat Drysuit Bag Upgrade

Ref: SSUOPTCHBAG

Price: £8.68 (Including VAT at 20%)

Upgrade from the standard simple drawstring bag to a very durable drysuit carrying bag that opens into a hexagonal changing mat, measuring 105cm across. Includes webbing handles and ID window.

Want your name on your bag? See here.

This is an option for a Seaskin drysuit. Should only be ordered if a Seaskin drysuit is also ordered.